Which is Better – One or Two Handle Faucets?

Share this!

Faucets are an important aspect of any home’s interior. Not only does a good faucet ensure constant water flow throughout all the water outlets of a house, but it also has an impact on how the house looks from the inside as well.

Nowadays, a variety of faucets can be seen in people’s houses, and two of the most prominent ones are single faucets and double faucets. However, which is better-one or two handle faucets?

If you are in doubt about this, do not worry any longer because we have got you covered with this article of ours where we will be discussing which faucet would be better for you and why.

Without further ado, let us get started!

Single Handle Vs Double Handle Faucets

From here on out, we will be taking a look at the features of both kinds of faucets.

How Do They Work?

As the name suggests, one-handle faucets only have a single handle with which you will be able to control the rate of flow of water, the temperature of the water, and so on. This also means that only a single lever is used to regulate the temperature of the water and determine the ratio of hot water to cold water or vice versa.

On the other hand, faucets that have two handles are equipped with separate levers through which water at the two temperatures (hot and cold) comes out. This, in turn, requires you to adjust the temperature of the water by turning each knob enough times until the water reaches your desired temperature.

When it comes down to which one is easier to use, we would say faucets with one handle are easier to use in this case since it is much easier to regulate the temperature of the water with these.

Appearance

The main reason why you should make sure you like how your faucet looks before you buy it is that you might not even feel comfortable with using it later on. Always go for the type of faucet that you are used to handling since this will make you feel more accustomed to its different functions.

For instance, if you wish to go for a more recent look with your faucet, we would advise you to opt for the one handle faucet.

On the other hand, if you want to stick to more of a traditional look, it would be in your best interest to purchase the two handle faucet.

Requirements to Be Met for Each Type of Faucet

Contrary to what some people might think, both types of faucets are actually built in such a way that they can be fitted on already-existing or ready-made faucet installation holes. This is so that whoever is installing the faucet to their sink and/or basin, be it a professional or someone else- they can do so with ease.

You do not have to worry about your sink or countertop having too many or too few holes since almost all the faucets (whether they have one handle or two) come with a base plate as well, which can be placed over the holes.

Disadvantages of Both Kinds of Faucets

Now that we are done comparing the two faucets that we came here to discuss today- let us take a look at some of the disadvantages that both faucets possess.

One Handle Faucet

Here are the disadvantages of one handle faucet.

Lower Level of Control: Since these faucets only have a single handle, it sometimes makes it difficult for many people to control the rate of water flow properly. Moreover, the lever might even be slippery on a few one handle faucets, thus making it even more difficult to achieve the correct water temperature and flow.

They Start Leaking Faster: Another bad side to one handle faucets is that, when compared to their handle counterparts, these faucets actually have a lower shelf life. However, you should know that there is no fixed time allocated for a faucet to work properly and most of the time, the shelf life of a faucet is also greatly affected by how it’s taken care of.

Repairing It Is a Lengthy Process: Repairing a broken or leaking one handle faucet is a lengthy process. It’s because when it gets damaged, you will have to turn off the shut-off valves of both hot and cold water that you will find located under your sink.

While the faucet is still being repaired, if you wish to check whether it has been correctly fixed or not, you will have to keep turning the shut-off valves on and off every now and then, which is a rather tedious task.

Two Handle Faucet

Let’s get to know the drawbacks of two handle faucet.

They Might Be Inconvenient at Times

This is especially when none of your hands are free. With a one handle faucet, you would still be able to turn it on with your elbow, but that is not the case with the traditional two handle faucets since these have knobs that need to be turned to regulate the water temperature.

More Difficult to Install

Two-handle faucets are also quite difficult to fit and usually require a counter with three holes instead of the usual two. This makes it unsuitable for installation on interiors that do not meet this requirement. However, if you still wish to fit a two handle faucet, you will have to spend some extra cash and make another hole for its installation.

Conclusion

This brings us to the end of our article for today. So, what do you think? Which is better – one or two handle faucets? We hope you get the answer to this question by now. See you again soon!

Share this!